How to socket PE water supply pipe

Ningbo Fangli Technology Co., Ltd. is a mechanical equipment manufacturer with nearly 30 years’ experiences of plastic pipe extrusion equipment, new environmental protection and new materials equipment. Since its establishment Fangli has been developed based on user’s demands. Through continuous improvement, independent R&D on the core technology and digestion & absorption of advanced technology and other means, we have developed PVC pipe extrusion line, PP-R pipe extrusion line, PE water supply / gas pipe extrusion line, which was recommended by the Chinese Ministry of Construction to replace imported products. We have gained the title of “First-class Brand in Zhejiang Province”.

From a professional perspective, PE water supply pipes are usually installed by socket installation, and the key professional knowledge are as follows:

I.                 Use pipe shear to break the pipe according to the installation needs;

II.               Identification number at the pipe depth to be socketed;

III.              Raise the temperature of the die head of the hot fusion machine to about 20;

IV.              At the same time, heat pipes and pipe fittings, and then socket (socket shall be released after a while in time, and shaking is strictly prohibited in the whole process of heating, socket and cooling;

V.               Natural refrigeration;

VI.              After the completion of the project construction, it shall be delivered for use after the acceptance of the experimental pressure project reaches the standard.

In addition, the PE water supply pipe can be paved underwater by socket method, which greatly reduces the construction difficulty and cost of the project.

If you need more information, Ningbo Fangli Technology Co., Ltd. welcomes you to contact for a detailed inquiry, we will provide you with professional technical guidance or equipment procurement suggestions.