Take you to know the manufacturing process of CPVC power pipe equipment


Ningbo Fangli Technology Co., Ltd. is a mechanical equipment manufacturer with nearly 30 years’ experiences of plastic pipe extrusion equipment, new environmental protection and new materials equipment. Since its establishment Fangli has been developed based on user’s demands. Through continuous improvement, independent R&D on the core technology and digestion & absorption of advanced technology and other means, we have developed PVC pipe extrusion line, PP-R pipe extrusion line, PE water supply / gas pipe extrusion line, which was recommended by the Chinese Ministry of Construction to replace imported products. We have gained the title of “First-class Brand in Zhejiang Province”.


CPVC power pipes produced by CPVC power pipe equipment are commonly used as cable protection pipes. The products have the characteristics of high strength, good flexibility, high temperature resistance, corrosion resistance, flame retardancy, good insulation, no pollution, not easy to aging, light weight and convenient construction. Their performance indexes have reached or exceeded the level of similar products in China after national and provincial testing, identification and certification. The product has great performance, which is better than the traditional asbestos cable row pipe and ordinary PVC pipe. It is an ideal substitute for the traditional power cable protective sleeve.


Because the melt viscosity of CPVC power pipe is at least twice than that of PVC and the processing temperature is high, the difficulty of processing and forming and the corrosion of equipment are caused by the release of HCl caused by thermal decomposition in the processing process. In the extrusion process, how to make CPVC power pipe, a high viscosity material, achieve the ideal "plasticization" is the key of CPVC power tube processing technology. What are the requirements for the "plasticization" manufacturing process of CPVC power tube?

1. The dosage of heat stabilizer in the formula is much higher than that of PVC. The requirement of heat stabilizer is due to the high processing temperature of CPVC power pipe. Obviously, it is not suitable to only use conservative three salt and two salt heat stabilizers. At present, the more naive heat stabilizers are composite lead series stabilizers with lubricating system.

2. In the extrusion and injection molding of CPVC power pipe, the role of processing additives in improving the plasticization quality. Processing aids must be used to improve the plasticization quality and increase the low-temperature impact resistance of CPVC power pipe materials and the toughness of products. As far as CPVC power pipe is concerned, even at the temperature of viscous flow state (such as 195/205 ), the flow unit is still primary particles, with poor interaction and heat transfer between resin fine particles, prone to melt fracture and poor plasticization quality.

3. In particular, melt fracture is easy to occur in injection molding, and the requirement for lubricant is due to the high melt viscosity of CPVC power pipe. Therefore, it is not appropriate to only use conservative paraffin, stearic acid and metal soap lubrication system. In the extrusion processing of CPVC power pipe, because CPVC power pipe tends to adhere to the metal surface of hot post-processing equipment (especially machine head and die), in order to eliminate this adhesion, external lubricant must be added to the formula. The external lubricant and CPVC power pipe resin should be immiscible.


If you need more information, Ningbo Fangli Technology Co., Ltd. welcomes you to contact for a detailed inquiry, we will provide you with professional technical guidance or equipment procurement suggestions.


  • QR