fl@fangli.com +86-574-28883018

Home > News

News

We are glad to share with you about the results of our work, company news,and give you timely developments and personnel appointment and removal conditions.

Maintenance and repair of extruder reducer

The reducer is an important part of the pipe extrusion equipment. The following are the precautions for the maintenance and repair of the reducer: 1. After the machine is used for a period of time, a comprehensive inspection should be made to check the tightness of all screws.

Extrusion process of plastic pipes

The extrusion process of plastic pipes is divided into three stages: 1. Plasticization of raw materials, that is, through the heating and mixing of the extruder, the solid raw materials become uniform viscous fluid. 2. Molding, that is, under the action of the extrusion parts of the extruder, th......

Notes for Production Operation of Twin Screw Extruder

Here we prepared some notes for production operation of twin screw extruder are: 1.When the twin-screw extruder starts normal production, it is necessary to first check whether the inner seals of the barrel and hopper are the original sealed samples. If there is any change or damage, it is necess......

The Function of the Production Line Equipment of PVC Pipe

Here, we’d like to briefly introduce you the function of the production line equipment of PVC pipe as follows: 1.Mixing of raw materials: PVC stabilizers, plasticizers, antioxidants and other auxiliary materials are added to the high-speed mixer according to the ratio and process, and the materi......

Characteristics and Application of Polypropylene Pipe

When people's living standards improve with the progress of society, people begin to pay more and more attention to their own quality of life, especially to the hygienic requirements of drinking water. Polypropylene pipe, as the fourth generation of new pipe after galvanized pipe, PVC pipe and alumi......

G Series PVC 32G-4 Four-Stand Pipe Extrusion Line

Scope of Application PVC 32G-4 four-stand pipe extrusion line is mainly used for the production of small and medium-sized PVC pipes, which are mainly used for Cold-Formed electrical casing, cable protective casing, etc.

<...99 100 101 102 103...144 >

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy

Reject Accept