fl@fangli.com +86-574-28883018

Home > News

News

We are glad to share with you about the results of our work, company news,and give you timely developments and personnel appointment and removal conditions.

Profit Brought By Twin Screw Extruder

Every customer needs to use some small parts in different times. In many ways, the most important is the twin screw. For twin screw, it can be said that twin screw factories and enterprises are very common. It is almost certain that in all accessories, only the twin screw device is the most widely u......

What methods are used to cut plastic pipes? How do they work?

Extruded plastic pipe has a fixed length specified in the standard. The plastic pipe cutting machine is mainly used to cut the plastic pipe according to the length requirements of the production line.

Installation site selection of PE pipe production line

For the installation site of PE pipe production line, please choose a place with sufficient space, and pay attention to the following matters:

Measures to solve the unstable current of the main machine of plastic extruder

Reasons for the unstable current of the main machine of plastic extruder: (1) Uneven feeding. (2) The main motor bearing is damaged or poorly lubricated. (3) A section of heater fails and does not heat. (4) The screw adjusting pad is wrong, or the phase is wrong, and the components interfere.

G Series PE Pipe Extrusion Line

G series PE pipe extrusion line is suitable for producing PE, PP, etc. plastic pipe and other polyethylene material. It features high automation, stable and reliable performance, high efficiency, etc.

Principle and application scope of single screw extruder

In most extruders, the screw speed is changed by adjusting the motor speed. The drive motor usually rotates at a full speed of about 1750rpm, which is too fast for an extrusion screw. If it rotates at such a fast speed, too much friction heat will be generated, and the uniform and well stirred melt ......

<...68 69 70 71 72...144 >

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy

Reject Accept