Industry Knowledge

Features of Twin Screw Extruder Gearbox

A new design of the gearbox transmission system of the twin-screw extruder. The output shaft transmission adopts a power split design, which doubles the torque transmitted by the output shaft, increases the carrying capacity of the whole machine by 50%, and increases the insurance coefficient by 30%......

The Structure Principle of Twin Screw Extruder

The basic mechanism of the extrusion process is simply a screw that rotates in the barrel and pushes the plastic forward. The screw structure is a slope or slope wound on the center layer, the purpose of which is to increase the pressure in order to overcome the greater resistance.

The Temperature Principle of Twin Screw Extruder

Extrudable plastics are thermoplastics, which melt when heated and solidify again when cooled. Therefore, heat is required during the extrusion process to ensure that the plastic can reach the melting temperature. So where does the heat of melting plastic come from?

Speed Reduction Principle of Twin Screw Extruder

What Are The Working Areas Of The Twin Screw Extruder?

How to Choose the Model of Twin Screw Extruder?

The best way to choose a twin screw is to look at the actual product and production requirements, and then determine your own demand points