fl@fangli.com +86-574-28883018
English English
Home > News

News

We are glad to share with you about the results of our work, company news,and give you timely developments and personnel appointment and removal conditions.
Why should add ACR or CEP, MBS and other materials in the formula when extruder processing UPVC pipes, and what are their characteristics

Why should add ACR or CEP, MBS and other materials in the formula when extruder processing UPVC pipes, and what are their characteristics

Due to the high brittleness, low melt strength and poor processing fluidity of UPVC materials, modifiers usually need to be added in the processing to improve the fluidity of UPVC, melt strength and material toughness. ACR or chlorinated polyethylene (CPE) and MBS are the modifiers of UPVC.

View Details
Brief Introduction to the Principle of Twin Screw Extruder

Brief Introduction to the Principle of Twin Screw Extruder

On the whole, the study of twin-screw extrusion theory is still in the initial stage. This is the so-called "skills more than science". From the study of its extrusion process, there are roughly three links:

View Details
Maintenance and repair of extruder reducer

Maintenance and repair of extruder reducer

The reducer is an important part of the pipe extrusion equipment. The following are the precautions for the maintenance and repair of the reducer:

View Details
Comparison Between Counter Rotating Conical Twin-screw Extruder and Parallel Twin-screw Extruder

Comparison Between Counter Rotating Conical Twin-screw Extruder and Parallel Twin-screw Extruder

Counter Rotating Conical Twin-screw Extruder; Parallel Twin-screw Extruder; extruder; plastic pipes; planetary cutting machine; Ningbo Fangli Technology; mechanical equipment manufacturer; plastic pipe extrusion equipment; PVC pipe extrusion line; PP-R pipe extrusion line, PE water supply/gas pipe e......

View Details
Five Points for Attention in PVC Pipe Production

Five Points for Attention in PVC Pipe Production

In the production process, since PVC is a kind of heat sensitive material, even if heat stabilizer is added, it can only increase the decomposition temperature and prolong the stable time without decomposition, which requires strict control of PVC molding temperature. Especially for RPVC, since its......

View Details
Process Control in PE Pipe Extrusion Process

Process Control in PE Pipe Extrusion Process

The process of PE pipe production line Main production process: preparation of raw materials + additives → mixing → conveying and feeding → forced feeding → single screw extruder → extrusion head→ sizing sleeve → spray vacuum calibration tank → spray or immersion cooling tank →digital printer →belt......

View Details
<...9596979899...165>
  • E-mail
  • QR
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept