fl@fangli.com +86-574-28883018

Home > News

Industry Knowledge

Introduction to maintenance of extrusion die

Here we’d like to inctroduce how to maintenance of extrusion die as follows: 1.Improper operation or handling during the whole maintenance and disassembly process is one of the main reasons for the damage of grinding tools. Therefore, technicians should disassemble and dismantle the grinding tool......

Plastic pipe extrusion die structure

The extrusion head is an important component in the extrusion production line. Its function is to further compact and plasticize the plasticized melt. After shunting, it enters the annular section channel and is cooled and shaped into pipe blank. The pipe extrusion head is divided into three types: ......

Installation site selection of PE pipe production line

For the installation site of PE pipe production line, please choose a place with sufficient space, and pay attention to the following matters: 1.There shall be no obstacles such as pillars within the moving range of materials and machines. 2.The height of the ceiling shall be more than 1000mm hig......

Difference between single screw extruder and twin screw extruder

Extruder is one of the types of plastic machinery. It is the most common machinery in the modified plastic industry. It is widely used in polymer processing industry and other production and processing fields. Extruder can be divided into single screw extruder and twin screw extruder. Their working ......

PPR cold and hot water pipe extruder production equipment

PPR pipe extrusion production equipment features 1. The machine is mainly used for the production of pipes with PPR resin as raw material 2. The design of slotted feeder barrel and barrier screw can improve the plasticizing effect 3. High extrusion capacity, low melt temperature and uniform te......

Structural characteristics and application scope of twin screw extruder

The screw and barrel of the extruder are designed based on the building block principle. Its thread shape, barrel structure, length diameter ratio, number of feeding and exhaust positions, screen change and granulation mode, electric instrument control mode, etc. can be optimized and adjusted accord......

<...105 106 107 108 109...138 >

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy

Reject Accept